Load Monitor
- Specification
| Series | N700 |
|---|---|
| Function | Multi-function 4 mode |
| Display | 4 digits for total measurement x 1 display |
| Sensor Inputs | Accept 1 or 2 350ohm full-bridge Strain Gage sensor(s) |
| Sensor Excitation | +5 & -5VDC(10V) at 70mA max. Short& Open circuit protected |
| Analog Output | 3.5mm stereo phone jack 0-25VDC = Max. Capacity of Display |
| Sensitivity | 0.057mv/v to 0.625v/v for (x10) high gain range at capacity 0.568mv/v to 5mv/v (x1) Low gain range at capacity |
| Automatic Zero Balance | Automatic Circuits maintain true zero during periods between measurements. Assure sensor & instrument accuracy regardless of ambient temperature excursions. |
| Manual Zero Balance | ±1 mV/V |
| Span Range |
Low-gain (x1) Gain modulus 40 ~ 400 High-gain (x10) Gain modulus 400 ~ 4000 |
| Frequency Response | Flat to 1 kHz |
| Speed | 0-400spm using threshold to trigger Up to 2000spm using Cam input to trigger |
| Cam input | Accepts 10 to 30VDC NPN or PNP proximity device Supply current at 50mA max. Limit Switch may also be used. |
| Relay Output | 1 from contact, 10AMP rating at 120VACBypass Switch is also available for the stop circuit |
| Computer Interface | RS485 multi-drop interface (optional) |
| Security | Security Key jumper provides protection to the monitor setting from being changed by unauthorized person |
| Power Requirement | 20W 85~140VAC(50/60HZ) or 170 ~280VAC(50/60HZ) |
| Operating Temperature | 0°C ~ 70°C |
| Dimension | 111(w) x 154(h) x 191(depth) mm |
| Weight | Approx. 4kg |
- Related Products